The car door is a very important vehicle part to be treated, thus ensuring the safety & comfort when driving. Door car owners often go unnoticed, whereas in case of damage can be fatal.
For example, if the glass is brittle rails so that water can enter the crack in the door and window glass driving mechanism makes rusty. So when the ups and downs the glass will feel heavy and must be assisted by hand. Not to mention the sound of creaking, as well as glass can be jam player instantly. Likewise, the door handle, if the lubricant to dry out the door opener mechanism, the door will be difficult to open.
For example, if the glass is brittle rails so that water can enter the crack in the door and window glass driving mechanism makes rusty. So when the ups and downs the glass will feel heavy and must be assisted by hand. Not to mention the sound of creaking, as well as glass can be jam player instantly. Likewise, the door handle, if the lubricant to dry out the door opener mechanism, the door will be difficult to open.
Things To Do
The following maintenance tips, should be at least 6 months:
1. Provide the necessary equipment such as a screwdriver plus and min, brush, diesel, grease and lubricant sprays.
2. Open the cover panels (door trim) with the position of glass dropped down. Open the bolt handle and the handle with a screwdriver plus. Then the player off the glass with a gouged lever pin.
3. Open the door by using a screwdriver mencungkilnya min. For cars with 'power windows' off switch. Note lis glass (weather strip) clean the dirt using a brush and diesel. Wait until dry. Or wash with soap and water after cleaning with a dry cloth.
4. Clean teeth and dab with a fat regulator. Also gear motor drive for the use of power windows. Lubricate also the player's arm and statement.
5. Check the regulator balancer shaft, top and bottom rails are also the driving shaft regulators. Clean up with diesel and then spread with fat.
6. Set the glass is tilted by raising the glass half balancer bolt and loosen the bottom two. After that push the glass back and tighten the screw pengimbangnya.
7. Consider opening the outer door, check whether there was a shift if it is enabled. If yes, lubricate with a lubricant spray. When spraying, check all door openings to play inside and out.
8. Check the door lock rod of iron. Especially the bottom of the key moves. Clean if corroded or dirty and spray lubricants.
9. If you are finished reinstall the door panels, for the power windows do not forget to plug the switch back.
